主要检测项目

• 金属材料室温拉伸试验、压缩试验、弯曲试验、冲击试验、硬度试验、压扁试验、扩口试验 

• 金属材料高低温拉伸试验、低温冲击试验         

• CCS 《材料与焊接规范》中纤维增强塑料的拉伸强度和模量、弯曲强度和模量、压缩强度和模量、层间剪切强度、玻璃纤维含量、巴柯尔硬度等；树脂的拉伸强度和断裂伸长率、弯曲强度和弹性模量、热变形温度、巴柯尔硬度、吸水性等；硬质泡沫塑料芯材和轻木芯材的密度、拉伸强度、压缩强度和弹性模量、剪切强度和弹性模量。

 

Main test items

• Tensile test at room temperature, compression, bending, impact, hardness, flattening and flaring test of metallic materials
• Tensile test at high and low temperature, impact test at low temperature of metallic materials
•  “Rules for Materials and Welding” of CCS :Fiber reinforced plastic,  tensile strength and modulus, bending strength and modulus,  compressive strength and modulus, interlaminar shear strength, glass fiber content, BA Karl hardness; resin,  tensile strength and breaking elongation, flexural strength and elastic modulus, thermal deformation temperature, bar Karl, hardness, water   absorption etc.;rigid foam core material and balsa wood core material,  density, tensile strength, compressive strength and elastic modulus, shear strength and elastic modulus.

       

1000kN液压试验机	布、洛、维硬度计
摆锤冲击试验机	50kN材料试验机